HOME | DD

Description
And here it is, a composite design of the Mountain God, Baradagi. Or more better known; Varan.

This design is comporised of the original 1958 design (color, hind legs spike patterns on the head), Godzilla Amphibia (noticable in the head and the spikes at the tip of the tail), Safi'jiiva (noticable in the arms), Jurassic World Dominion's Giganotosaurus (kinda noticable in the way the spikes and patterns on Varan's back as well as a few features on the face) and just a tiny bit of GMK Ghidorah (noticable in the spikes in the back of the jaws), Trendmasters Varan (in the chest area) and Tobi-Kadachi (they're just barely noticable behind the folded up membranes in one of the front arms. Also, the look of the membranes stretched out was exactly that of Tobi's as well).

I must bring this up now. But currently, I do not have a version of this varan in it's flying state as of yet due to running into complications not only trying to have it try to look like it's the same varan, but certain body proportions appeared to be much bigger or smaller than what they look in this image you see here. So, until I can be able to finally take care of that issue, it might be a while till there's a flying Varan image to go with this one as well.

(Update: 8/1/2021).

Okay, so after finally managing I finally managed to salve the issue and now I bring you the flying version. I know certain sizes and proportions might be off, but I did the best I could to have it match with the proportions of the crawling Varan the best I could.

Speaking of the crawling version, I changed the color of the membrane on the arms and legs. I kinda wanted to give it a less darker color. Also, while I had the membrane on the arms a dark color on the front and a lighter color on the back, I accidently had this same patterns when it went down his legs, which considering when Varan would open up his and membrane to fly, it would seem a bit weird like half of the membrane on both sides was half dark and half light color. So, I fixed that up as well.

And lastly, if you want the two versions of these seperately, here are the links.

Old (Crawling).

sta.sh/01xd5n8ahj09

Old (Flying).
sta.sh/01vthhz3hfxa

And that's just about everything. Sometime later in the month or so, I'll be doing Manda.

(Update: 4/10/2023).

Yeah, I did a little update on the varan design. Nothing too big, I added some bigger teeth at the jaw to give it that imitation to certain depictions of certain Demons and Oni that are seen with certain jaws that are bigger than the rest. Also, I sharpened the edges to some of the back spikes and I fixed on the skin flaps at the legs.

The new versions of the crawling and flying ones seperately can be found here.

(Crawling).

sta.sh/04c1m0z282x

(Flying).

sta.sh/01jdfndssnil

The previous versions can still be found here in the original spot as before just in case you don't like the big bottom teeth.

Description
And here it is, a composite design of the Mountain God, Baradagi. Or more better known; Varan.

This design is comporised of the original 1958 design (color, hind legs spike patterns on the head), Godzilla Amphibia (noticable in the head and the spikes at the tip of the tail), Safi'jiiva (noticable in the arms), Jurassic World Dominion's Giganotosaurus (kinda noticable in the way the spikes and patterns on Varan's back as well as a few features on the face) and just a tiny bit of GMK Ghidorah (noticable in the spikes in the back of the jaws), Trendmasters Varan (in the chest area) and Tobi-Kadachi (they're just barely noticable behind the folded up membranes in one of the front arms. Also, the look of the membranes stretched out was exactly that of Tobi's as well).

I must bring this up now. But currently, I do not have a version of this varan in it's flying state as of yet due to running into complications not only trying to have it try to look like it's the same varan, but certain body proportions appeared to be much bigger or smaller than what they look in this image you see here. So, until I can be able to finally take care of that issue, it might be a while till there's a flying Varan image to go with this one as well.

(Update: 8/1/2021).

Okay, so after finally managing I finally managed to salve the issue and now I bring you the flying version. I know certain sizes and proportions might be off, but I did the best I could to have it match with the proportions of the crawling Varan the best I could.

Speaking of the crawling version, I changed the color of the membrane on the arms and legs. I kinda wanted to give it a less darker color. Also, while I had the membrane on the arms a dark color on the front and a lighter color on the back, I accidently had this same patterns when it went down his legs, which considering when Varan would open up his and membrane to fly, it would seem a bit weird like half of the membrane on both sides was half dark and half light color. So, I fixed that up as well.

And lastly, if you want the two versions of these seperately, here are the links.

Old (Crawling).

sta.sh/01xd5n8ahj09

Old (Flying).
sta.sh/01vthhz3hfxa

And that's just about everything. Sometime later in the month or so, I'll be doing Manda.

(Update: 4/10/2023).

Yeah, I did a little update on the varan design. Nothing too big, I added some bigger teeth at the jaw to give it that imitation to certain depictions of certain Demons and Oni that are seen with certain jaws that are bigger than the rest. Also, I sharpened the edges to some of the back spikes and I fixed on the skin flaps at the legs.

The new versions of the crawling and flying ones seperately can be found here.

(Crawling).

sta.sh/04c1m0z282x

(Flying).

sta.sh/01jdfndssnil

The previous versions can still be found here in the original spot as before just in case you don't like the big bottom teeth.