HOME | DD
SiathLinux — Red 4DSC
by-nc-nd
Published: 2008-06-19 18:44:48 +0000 UTC; Views: 1292; Favourites: 9; Downloads: 0
Redirect to original
Description
Red 4DSC (for those that don't know that 4 Door Sports Car)Powered by 2.0 Liter inline 4 cylinder, connected to a sequential 6 speed transmission, Rear Wheel Drive.
This car is the BASE car for Killa Koala Racing (like the name
) Rally X racer... (thus the blacked out glass - no interior yet.)Ok, BODIES on cars are amazingly difficult to get anywhere near straight and decent looking... and nothing stays aligned once you cut out the hood, trunk, doors, gas door, and such amazingly I think this on is 'close enough' to work out the details on... (did I mention I've scrapped over 5 bodies on this project for one reason or another...)
I know the front corner lamps don't fit their space - just haven't fixed that since moving the body to adjust the location of the firewall...
To Do:
Add 12 point roll cage, seat, steering wheel, shifter and related linkage, interior floor pan, interior passenger/trunk separator, dash, gages, 5 point harness belt... other stuff but heck if I can think of it all while typing this...
Enjoy.... more to come soon ....
Let me know if you'd like to see a 'fly around on this
Made in Blender 2.42, 2.45, AND 2.46 ... OMG I've been working on this WAY WAY too long...
Permission for [link] to display this
Related content
Comments: 85
Oh if I knew then all that I know now... lol - that's actually quite old...
I have been 'toying' with creating a newer version of that car (since I've lost that file to a dead hdd).
👍: 0 ⏩: 0
Very nice work indeed it is looking great so far keep up the great work! ^_^
👍: 0 ⏩: 1
Thank you, long ways till I consider it done ...
👍: 0 ⏩: 1
Well you modeling keeps getting better and better! ^_^
👍: 0 ⏩: 1
Yeah, I have been really trying to make things look better.... I'm not totally happy with this car, but I'm going to finish just so I can say I finished something...
👍: 0 ⏩: 1
I will cheeck it out again when it is finished! ^_^
👍: 0 ⏩: 1
I did a better animation of it - but have yet to upload it yet
👍: 0 ⏩: 1
I will have to check it out! ^_^
👍: 0 ⏩: 1
Looks pretty good. The hood looks too thin though...I've been staring at it for awhile, and there is something weird about it, but I quite can't put my finger on it. As of right now, just the hood has come to.
I like the shiny :]
👍: 0 ⏩: 1
Yeah, hood has now 'support' parts under it... (neither does the trunk lid... gotta put those on my to do list)
I've done a lot of clean up on the body mesh, finished out the clearance lights front and rear... something odd on the back glass, (can't see that from this render...) although that mesh shows no oddities.... lots to do...
👍: 0 ⏩: 1
What is going on with the back glass?
👍: 0 ⏩: 2
Hmmm, it might be weird with how you unwrapped it? If there is something wrong with textures, I blame the unwrap until I can find the cause, which it is usually the unwrap lol
👍: 0 ⏩: 0
I noticed that too, not really sure - as there is no 'edges' in the mesh in that direction and in fact that whole back glass is only made from 3 faces...
I'll be doing a new animation this week (it's going to be 500 frames, take over 8 hours to render and will include a fly through that back glass, so I'm really going to need that glass to be correct before I put 8 hours of render into this model) I've done the seats and the steering wheel (the wheel is however not in place, I have to do the column before I rotate it in order that they stay perfectly aligned to each other .. )
👍: 0 ⏩: 0
Thanks, long ways from done...
👍: 0 ⏩: 1
👍: 0 ⏩: 1
oh i hear ya...i've been tryin to slow down with my renders, and make them more life like,...takin forever, but i hope im improving...
👍: 0 ⏩: 1
You've improved greatly, and your work with *butchen are really good.. Maybe, the 3 of us can do something interesting one day.... (ie maybe you and he and this ride -- after I get all the logo work done on the UV Map... )
👍: 0 ⏩: 1
sweetness! im sure he'll like that!
👍: 0 ⏩: 1
It will still be red - but it's going to have a Koala and a logo 'Killa Koala Racing' on it... along with some really graphics and 'sponsor graphics'
👍: 0 ⏩: 1
One of the Graphics will be a "Jl designs" - Which will represent my oldest daughter (her initials are J.L. but she does a cool capital J lower case L flowing script
Another graphic will be "Siath Speed Racing" - obviously that is what I'm calling my car designs
The "Killa Koala Racing is what Joy and I have already established would be her cars name if she ever raced cars.
👍: 0 ⏩: 1
Yeah, the Koala logo image is done
👍: 0 ⏩: 1
sweet...gonna check it out!
👍: 0 ⏩: 1
I haven't put it up here yet..
👍: 0 ⏩: 1
Thanks, did you see my journal...
👍: 0 ⏩: 1
You should - I've been doing Animations
👍: 0 ⏩: 0
very nice work siath and great animation
keep your good work
👍: 0 ⏩: 1
Thanks, I've got a long ways to go...
Also, could you pop me a link to your site - I've had an upgrade and it lost my bookmarks.. .
👍: 0 ⏩: 1
my site is down for now i work on new design ...
i finish and i give you the link
👍: 0 ⏩: 1
ok,
👍: 0 ⏩: 0
Wow, what a great job!
Almost makes me want to finish the car that I started (it was supposed to be a Dodge Viper based on my son's toy model of it).
On second thought, I think I'll be sticking to furniture for a while.
👍: 0 ⏩: 1
Thank you, it's no where near done .... and needs a lot of clean up on the mesh...
👍: 0 ⏩: 1
Well you're off to a great start!
👍: 0 ⏩: 1
| Next =>