HOME | DD
#alicorn #arms #based #gun #laser #lasergun #magic #mlp #rifle #mbr #totpw #alicornarms
Published: 2016-08-26 18:47:52 +0000 UTC; Views: 2096; Favourites: 52; Downloads: 8
Redirect to original
Description
The Alicorn Arms Experimental Magic Based Rifle is a pony based weapon, not designed for human hands. It is a weapon featured in my uncompleted story, MLP: Tale of a Palace Wizard and created by Alicorn Arms. It was designed to replace conventional gunpowder based weapons. Instead of rounds, a single magical rod is inserted in the squared receiver located at the top above the trigger.The "bolt" on the receiver represents how much ammunition is left in the rod. With every trigger pull the magical rod in the center is compressed, and literally squeezing magic out of it. That magic moves into the centerpiece, known as the "focuser." When the magic is converted to lethal levels, it is rapidly shot forward and out the barrel. Each ammunition rod can fire the weapon 35 times.
In case of having to deal with changeling giants, or even enemy light armor, the selector switch can be pushed all the way forward for a charged shot. This lifts the compression restricting plate within the receiver. Upon a held down trigger pull, the entire ammunition rod is compressed, squeezing all of the magic into the "focuser." This will make the weapon start to overheat, so it is recommended to not hold the trigger too long. When the trigger is released the contained magic will fire out of the barrel, capable of easily penetrating any changeling exoskeleton, and up to 30mm of cast armor.
When the ammunition is spent the "bolt" will be all the way forward and in the down position. To reload simply lift the bolt and pull it back like the standard bolt action rifle. press the release lever located just behind the receiver, and the receiver will lift to the upward position. When the receiver is in the upward position, the spent rod will automatically eject outwards and to the right so that a new one can be inserted. To ready the rifle just close the receiver and make sure the safety is turned off.
[Note I'm not a weapon designer in any way, this was just for fun. I try to think about how things operate and I try to get terms correct, but again I'm not an expert.]
This concept routed from Fallout 4 and 4's Laser Rifle.
Any comments, faves, or suggestions on how to improve are always welcome!
Related content
Comments: 8
Kabutomania [2016-08-28 18:30:38 +0000 UTC]
The safety notch/catch on the charging lever port is on the wrong end of the port, I think it's supposed to be on the back.
Other than that, I love this design!
👍: 0 ⏩: 0
guardmn [2016-08-28 07:57:35 +0000 UTC]
This is an awesome design.I think humans could use this effectively.
👍: 0 ⏩: 1
viablebutton46 In reply to guardmn [2016-08-28 15:36:59 +0000 UTC]
Thank you! And the original design had a smaller hand/hoof guard that couldn't actually work with hooves. But it would have been perfect for a human.
👍: 0 ⏩: 0
cowboyjt [2016-08-27 03:03:38 +0000 UTC]
You know, Cutefuzzyweasel came up with something similar to this:
A flamethrower-like rifle with a rod in the 'barrel' that energy/magic is focused through.
But the rod progressively melts as the weapon is fired and need to be replaced.
Like a stick-welder.
👍: 0 ⏩: 1
viablebutton46 In reply to cowboyjt [2016-08-27 16:31:05 +0000 UTC]
Interesting. That sounds really cool actually.
👍: 0 ⏩: 1
cowboyjt In reply to viablebutton46 [2016-08-27 17:10:33 +0000 UTC]
He got the idea from Ghost-Busters:
youtu.be/psITMfkgV5g?t=1m37s
👍: 0 ⏩: 1
viablebutton46 In reply to cowboyjt [2016-08-28 16:04:41 +0000 UTC]
Ah! Very interesting. That would make more of a logical sense with technology.
👍: 0 ⏩: 1























